Explaining the CCR Rule and related projects

Blog

Get the report — Coal Combustion Residuals: Environmental Risk and Remedy

GIS capabilities ABSTRACT: Coal combustion residuals (CCR), commonly known as coal ash, are created when coal is burned by power plants to produce electricity. Coal ash is one of the largest types of industrial waste generated in the United States, with several sites in the Carolinas having coal ash impoundments and landfills. Coal ash can contain constituents like mercury, selenium, and arsenic. Without proper management, these constituents can contaminate waterways, groundwater, drinking water, and air.

The EPA finalized national regulations to provide a comprehensive set of requirements for the safe disposal of CCR from coal-fired power plants. The federal CCR Rule establishes technical requirements for CCR landfills and surface impoundments, and it addresses risks from coal ash disposal, e.g., leaking of contaminants into groundwater, blowing of contaminants into air as dust, and the possible failure of coal ash surface impoundments. This rule also supports the responsible recycling of CCRs by distinguishing safe, beneficial use from disposal.

This presentation will provide an overview of the federal CCR rule and associated state regulations, and it outlines many of the CCR compliance activities we are conducting at current and former coal-fired power plants. Activities include comprehensive site assessments focused on groundwater flow characterization and the nature and extent of coal ash constituents occurring in groundwater, soil, surface water, and sediments. Based on the comprehensive site assessments, corrective action plans have been developed in coordination with the state regulatory agencies. Corrective action plans were based in part on human health and ecological risk assessments that determined whether the occurrence of specific coal ash constituents necessitates remedy.

Get the full report

Kathy Webb, P.G.

Senior Market Leader | Principal

Kathy Webb, who co-founded SynTerra (then known as The Fletcher Group) in 1992, has completed remedial investigations and regulatory compliance projects associated with Resource Conservation and Recovery Act (RCRA) facilities, state and federal Superfund sites, solid waste landfills, brownfield redevelopment, utility coal combustion residual (CCR) management units, and regulated industrial facilities. She has supported litigation as an expert witness related to chlorinated solvents, metals, and polychlorinated biphenyls (PCBs).

Kathy is known for her practical assessment strategy with the perspective of the client’s business objectives. She routinely evaluates groundwater corrective action systems for effectiveness and progress toward achieving compliance objectives. She has co-authored a trade journal paper with case studies of low-impact remedial strategies. Kathy is a licensed Professional Geologist in North Carolina and South Carolina.

Mark Taylor, P.G.

Principal

Mark has worked more than 40 years in natural-resource based industries. His expertise includes mine geology and mine engineering, hydrogeologic and geotechnical investigations, solid and hazardous waste management, and regulatory negotiations. He has published peer-reviewed papers about coal geology, ore geochemistry, mineralogy, and solid waste management. He is a leading expert in mining and environmental permitting for litigation support.

Mark is licensed as a Professional Geologist in South Carolina, Alabama, Arkansas, Georgia, Kentucky, Mississippi, North Carolina, and Washington. He serves on the boards of the Upstate Red Cross and Upstate Forever. He served on the South Carolina Board of Registration for Geologists for six years. Mark holds a Master’s degree in Geological Sciences from The University of Michigan and a Bachelor’s degree in Geological Science from Harvard University.

Andrea Kehn, P.E.

Vice President of Engineering | Principal

Andrea Kehn, leader of our Civil & Environmental Engineering Business Unit, has 28 years of experience in chemical manufacturing and environmental consulting. She leads and supervises staff professionals on multidisciplinary projects for a variety of industrial clients. Andrea’s vast experience and expertise includes: air quality construction and operating permitting; air quality modeling; air permit record-keeping and reporting; Oil Spill Prevention Control and Countermeasures (SPCC) and Storm Water Pollution Prevention Plans (SWPPP); NPDES permitting; water quality modeling; process safety management; risk management compliance and auditing; and RCRA compliance.

Andrea is registered as a Professional Engineer in South Carolina. She holds a Bachelor of Science degree in Chemical Engineering from Michigan Technological University.

Ruth Albright, P.E.

Vice President | Principal

Ruth has led projects for major industrial facilities throughout the Southeast and beyond. She built her knowledge of environmental regulations and their application to manufacturing operations while working for the second largest chemical manufacturing company in the United States. At SynTerra, she has expanded both her knowledge and reputation working for chemical manufacturing operations of all sizes. She has also worked extensively with other manufacturing operations, including pulp and paper, industrial equipment, pharmaceuticals, food, and automotive parts and assembly. Her experience includes air and wastewater permit compliance, solid and hazardous waste management, solid waste construction permitting, hazardous materials transportation, wastewater treatment systems, air pollution control equipment operations and maintenance, and ambient air monitoring systems.

Ruth is a professional engineer registered in South Carolina, North Carolina, Georgia, Florida, Virginia, Mississippi, Oklahoma, Michigan, Arkansas, and Kentucky. She is an active member of the South Carolina Chamber of Commerce Environmental Technical Committee and serves as the chair of the water subcommittee. She has previously served as the program and committee chair for the Greater Greenville Chamber of Commerce Environmental Affairs committee. She has a Bachelor’s degree in Chemical Engineering from Clemson University.